STIHL ROLLOMATIC® E Mini Light
The STIHL ROLLOMATIC® E Mini Light is a general-grade laminated guide bar made of high-grade steel.
The STIHL ROLLOMATIC® E Mini Light is a general-grade laminated guide bar made of high-grade steel. Two metal plates are electrically welded together to provide stability. To reduce weight, it is completely hollowed out after being welded and is filled with fiber-reinforced polymide. The 14” bar is 25% lighter than a comparable conventional guide bar. This bar has excellent rigidity for efficient cutting and better balance during limbing operations and is designed for use with PMM3 saw chain. A sprocket is incorporated in the nose of the bar that carries the saw chain from the top to the bottom of the bar. This not only reduces wear, but also enables the bar nose to be made considerably narrower. This type of construction is an advantage where extensive use is made of the bar nose (i.e. limbing and boring). All STIHL ROLLOMATIC® bars designed with a narrow nose help reduce kickback tendencies. And the star-shaped sprocket can be replaced several times before the whole bar is due for replacement, increasing the bar’s service life.
Applications: This bar is primarily intended for use by arborists.
STIHL recommends using low-kickback, green-labeled chain and green-labeled reduced-kickback bars on all powerheads.
Note: The actual listed guide bar length can vary from the effective cutting length depending upon which powerhead it is installed.
| STIHL ROLLOMATIC® E Mini Light Specifications | |
| AVAILABLE LENGTHS | E Mini Light available in 10" (3005 008 7603), 12"(3005 000 7605) and 14" (3005 000 7609). |
Important Information
IMPORTANT SAFETY INFORMATION
The occurrence called “kickback” can cause serious
or fatal injury. Always read the instruction manual carefully before
using your saw. STIHL uses a green and yellow color-coding
system to help you select a powerhead, bar and chain combination
that complies with the kickback requirements of ANSI
Standard B175.1 (gasoline-powered saws) and §30 of UL 1662/
ANSI Standard B175.1 (electric chainsaws). Ask your STIHL
dealer about safe operating procedures and the advantages of
the STIHL Quickstop® chain brake, STIHL Quickstop® Plus additional chain braking feature, STIHL reduced kickback bars and STIHL low-kickback
saw chains.
STIHL recommends the use of green reduced kickback bars and green low kickback chains on all STIHL chainsaws.
* The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on.
WARNING! Improper use of any power tool may cause serious
or fatal injury. Read, understand and follow carefully the operating
and safety instructions in your instruction manual before using such products.
STIHL products sold through U.S. STIHL Dealers are for distribution in the United States only.
We Also Suggest
-
-
SPECIAL OFFER
Complete Filing Kits
Includes file guide, depth gauge, round file, flat file and two file handles in tool pouch. Kits available for the following chain types: STIHL PICCO™ Mini; 1/4" pitch chain; .325" pitch chain; 3/8" pitch chain; .404" pitch chain.
-
-
-
SPECIAL OFFER
No-Spill® Fuel Containers
No-Spill® fuel containers advance convenience and quality in gasoline-can design by reducing emissions of hydrocarbons from evaporation, permeation and spillage. This helps protect the environment as well as saves you on fuel costs due to waste. Each container is molded from fluorinated, high molecular weight material for low permeation. The thumb-button flow control allows filling even smaller-sized tanks reducing the risk of spilling and is designed to stop the flow automatically, when the tank becomes full, to prevent overflowing. Built on a wide, stable base for less likelihood of upsets and equipped with child-resistant closures, all No-Spill® containers comply with both EPA and CARB requirements. With 1¼-gallon, 2 ½-gallon and 5-gallon sizes available, you’re sure to find one that fits your needs.
-
-
-
SPECIAL OFFER
Bar Scabbards
With our newly designed STIHL scabbards, you can keep your STIHL chainsaw and pole pruner better protected during transport and storage. Each scabbard is uniquely designed to fit a specific guide bar length, offering 100% coverage. And while we were at it, we made them even easier to install – giving the scabbards a funnel-shaped opening and improved clamping.
-
For Your Safety
-
-
SPECIAL OFFER
Pro Mark™ Helmet System
The Pro Mark™ Helmet System is designed to offer premium protection to your most premium asset –your head. The hard hat features a lightweight ABS thermoplastic shell and a six-point ratchet-style suspension system for shock absorption and overall comfort. For hearing protection, we’ve used our NRR 25 earmuffs to help block out tool and engine sound. The visor is a durable steel mesh full-face screen, designed to protect your face from flying debris. And a built-in rain gutter directs rain away from your face during inclement weather.
Meets ANSI standards for earmuffs (ANSI S3.19-1974) and have a Noise ReductionRating (NRR) of 25 dB(A), visor (ANSI Z87.1-2009) and hardhat (ANSI Z89.1:2009).Type 1 Class G
-
-
-
SPECIAL OFFER
STIHL Pro Mark™ Dynamic Protective Gloves
Power up any STIHL product while wearing STIHL Pro Mark™ Dynamic Gloves. Featuring multiple layers of cut-retardant materials – Avertic™ Pro and Dyneema fabrics by Engtex® – these gloves will help deliver the protection you need while operating your STIHL chainsaw. The palm and inner fingers are made of full-grain tanned leather, so you can work with comfort without sacrificing a firm hold. Accented with an orange rip-stop nylon backing, these dynamic gloves offer style and professional-grade protection. The STIHL Pro Mark™ Dynamic Gloves are water repellant, breathable and feature a Velcro wrist closure to help keep wood chips, snow, ice and other debris from getting inside.
-
