TS 800 STIHL Cutquik®
Does the job of large walk-behind machines. Deep cutting 16" wheel.
The TS 800 STIHL Cutquik® cut-off machine features a magnesium guard making the machine a full 0.7 pounds lighter than the previous model. The TS 800 features a 16” cutting wheel, the largest size we offer in a handheld design. When used with the optional STIHL Cutquik® Cart, the TS 800 is an excellent alternative to conventional walk behinds because it can be used as a handheld or quickly snapped into our cart for long, straight, controlled cuts. It’s also fuel efficient, with enough power to cut through asphalt, concrete, rebar, iron and steel with ease.
The TS 800 also features an ergonomic design and five-point advanced vibration control system built right into the handle, maximizing comfort so you can power through your day with less fatigue. When long, straight expansion joint cuts are needed, the optional cart, mounted water tank, guide wheel and depth gauge wheel make it easy to help keep the cut straight. With a cutting depth of up to 5.6”, the TS 800 is a real pro performer whether in your hands or on the cart.
Important Information
WARNING! Never use carbide-tipped, wood cutting or circular saw blades on cut-off machines. They can cause severe personal injury or death from reactive forces, blade contact or thrown tips. Never cut wood of any type.
Note: STIHL engine products with the Caring for Nature logo are cleaner than EPA Standards for exhaust emissions.
Note: STIHL recommends use of fuel with no more than 10% Ethanol content. Using fuel with greater than 10% Ethanol content may cause damage to your equipment and may void your STIHL warranty.
WARNING! Improper use of any power tool may cause serious
or fatal injury. Read, understand and follow carefully the operating
and safety instructions in your instruction manual before using such products.
STIHL products sold through U.S. STIHL Dealers are for distribution in the United States only.
| TS 800 STIHL Cutquik® Specifications - Professional Use | |
| POWER SOURCE | Gas |
| WEIGHT | 28.0 lbs. |
| MAXIMUM CUTTING DEPTH | 5.6" |
| MAXIMUM WHEEL SIZE | 16" |
| MAXIMUM SPINDLE SPEED | 4,600 rpm |
| ARBOR SIZE | .79 in. |
| ENGINE SPEED | 9,300 rpm |
| ENGINE POWER | 6.7 bhp |
| FUEL CAPACITY | 40.6 oz. |
| DISPLACEMENT | 98.5 cc |
| Note: This product is for professional use only. Weight displayed is dry weight including water attachment and guard. Shown with optional STIHL diamond wheel. | |
Important Information
WARNING! Never use carbide-tipped, wood cutting or circular saw blades on cut-off machines. They can cause severe personal injury or death from reactive forces, blade contact or thrown tips. Never cut wood of any type.
Note: STIHL engine products with the Caring for Nature logo are cleaner than EPA Standards for exhaust emissions.
Note: STIHL recommends use of fuel with no more than 10% Ethanol content. Using fuel with greater than 10% Ethanol content may cause damage to your equipment and may void your STIHL warranty.
WARNING! Improper use of any power tool may cause serious
or fatal injury. Read, understand and follow carefully the operating
and safety instructions in your instruction manual before using such products.
STIHL products sold through U.S. STIHL Dealers are for distribution in the United States only.
Model Features
-
Ergonomic Grip
The ergonomic top-handle bar design provides an optimal comfortable grip in any working position. -
Semi-Automatic Belt Tensioning
With consistent semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings. -
Anti-Vibration System
STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience. -
Bayonet-Style Filler Cap
Includes retainer for easy use, even with gloves on. -
STIHL ElastoStart™
The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out. -
X2 Air Filtration System
The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency. -
IntelliCarb™ Compensating Carburetor
The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box. -
Reduced-Emission Engine Technology - Caring for Nature
The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards. -
Decompression Valve
The decompression valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.
We Also Suggest
-
-
SPECIAL OFFER
TS Wheel Kit
Maintain control and consistency on difficult cuts with the TS Wheel Kit. The kit consists of two small wheels that mount directly to most STIHL Cutquik® cut-off machines. These wheels help with floor cutting when a full cart application isn’t warranted. Kit fits most STIHL cut-off machines including the TS 410, TS 420, TS 500i, TS 700 and TS 800.
-
-
-
SPECIAL OFFER
Tool Holder / Rental Kit
Designed for use with any model of STIHL Cutquik®, this accessory includes a brass water connector and tool holder.
-
For Your Safety
-
-
SPECIAL OFFER
Black Widow Glasses
STIHL Black Widow Glasses offer an ideal combination of protection and style. These protective glasses have a lightweight, wrap-around design that blocks out 99% of harmful UV rays. Their soft-touch temple inserts provide additional comfort and are designed to help reduce slippage. The lenses are made from optical-grade polycarbonate and are available in multiple shade color options.
Meets ANSI Z87+ Standard
Available lens colors: Indoor/Outdoor Mirror, Smoke Mirror
-
-
-
SPECIAL OFFER
Construction Hard Hat System
Combining first-class durability and all-day comfort, the STIHL Construction Hard Hat System gives your projects a proper foundation in protection. The system starts with a hard hat made from tough ABS thermoplastic. A six-point ratchet-style suspension system improves comfort, as well as shock absorption. The system also features a Cool Guard sweat band and rain gutters, keeping both perspiration away from your eyes and precipitation away from your neck. Its comfortable, adjustable hearing protection help keep down job site noise while its clear, PETG full-face shield helps keep your face protected from flying debris.
Meets ANSI Z89.1-1997 Type 1 Class. Hearing Protectors meet ANSI S3.19-1974 Noise Reduction Rating (NRR) of 23 dB(A). Full Face Shield meets ANSI Z87.1-1989.
NOTE: Also available as a hard hat only. Meets ANSI Z89.1-1997 Type 1 Class G & C.
-
-
-
SPECIAL OFFER
Anti-Vibration Gloves
Reduce the vibration from handheld machines with anti-vibration gloves from STIHL. The palms and fingers are specially designed to absorb vibration energy, helping you stay steady throughout your workday.
Classifications: Meets anti-vibration standard ISO 10819:1996 and ANSI S2.73.
-TRm at .72 for mid-frequency range
-TRh at .55 for high-frequency range
Materials: 7-gauge knit shell, shock-absorbing material and elastic wrist
Available sizes: L, XL
-
-
-
SPECIAL OFFER
Basic Hearing Protector
When it has the STIHL name, it’s made to work as hard as you do. Our Hearing Protectors feature a padded stainless steel spring wire headband. They help maintain constant pressure, staying firmly in place while you work. They’re also easy to adjust, so you can set the ideal fit with minimal effort.
Meets ANSI S3.19-1974 standard. Noise Reduction Rating (NRR) of 23 dB(A).
Available color: Black/Grey
-
